|
|
| |
|
|
HKTS 18 5.1-Channel Home Theater Speaker System
The speaker package for people who hate it when people talk during movies. The HKTS 18 is a powerful 5.1-channel solution with dual midrange drivers in both the satellites and the center channel for heightened realism, and a 200-watt powered subwoofer for bass that isn’t one bit intimidated by all that heightened realism. And those talkers? We guarantee they’ll find this a tough act to compete against. |
|
|
|
|
|
Support
|
|
| Documentation |
| The latest owner’s manuals, quick start guides, and documents. |
|
|
|
|
| FAQs |
| Fast answers to the most commonly asked questions. |
|
|
|
|
| Returns |
| Find all the information you need on handling returns. |
|
|
|
|
|
|
|
| Service Center |
| Need service? Find the closest service center to you. |
|
|
|
|
|
|
Documentation
The latest owner’s manuals, quick start guides, and documents.
|
|
|
|
|
Warranty Information
Get all the details concerning the warranty
for this product.
|
|
|
|
FAQs
Fast answers to the most commonly asked questions. |
| Q | There is an odd-shaped black metal part included with my speaker system. Is it a wall-mount bracket for the center speaker? | |
| A | Yes. The bracket may be used to create a small shelf for the center speaker if it isn't practical to place it on top of your TV. Follow these instructions to install the center speaker wall-mount bracket:
STEP ONE:
Mount the wall-bracket plate on the wall in the desired location. If possible, position the bracket so that at least one of the mounting screws (not included; use size #10) may be installed directly into a wooden wall stud. If that is not possible, use optional wall anchors that are rated to support at least 25 pounds. The customer is responsible for proper selection and use of mounting hardware, available at hardware stores, to properly and safely wall-mount the speakers.
STEP TWO:
If the speaker wires were run inside the wall, thread the center speaker cable through the large opening in the back of the wall plate. Otherwise, do not use the opening. In either case, thread the cable through the semicircle opening in the bottom rear of the center speaker’s molded base (not shown in the diagram), and insert the speaker wires into the terminals on the underside of the speaker, remembering to observe the correct polarity.
STEP THREE:
Gently peel off the two rubber pads from the speaker’s feet, revealing the screwholes underneath. Place the speaker on the bracket shelf so that the screwholes in the feet line up with the screwholes in the shelf. Use the raised portions of the shelf to guide the speaker into the correct position. Secure the speaker to the shelf with the included screws, as shown in the diagram.
The bracket and speaker are not designed to pivot or tilt, and attempting to move either will damage the bracket and possibly the wall, which would not be covered by your warranty.
Click here to view the diagram. |
|
|
|
|
|
Product Updates
The latest software and firmware upgrades.
|
|
|
|
|
Installation Instructions
|
|
|
|
|
|
|
|
|
|
HKS 9
|
|
HKS 9 Surround Speakers
No matter how good things get, there’ll always be an upgrade. HKS 9 speakers are identical to HKTS 18 speakers, except that they’re available in pairs, for easily upgrading a 5.1-channel HKTS 18 system to 7.1 channels. The additional speakers add a surround back channel for the ultimate in cinema-like sound.
|
|
|
|
|
|
HTFS 2BQ
|
|
HTFS 2BQ Floor Stands
Designed to position any HKTS satellite at an ideal height for seated listeners, these aluminum floor stands feature a cable-management system to keep speaker wires out of sight.
FREE Ground Shipping
when you buy direct from harman kardon at HarmanAudio.com
|
|
|
|
|
|
|
Service Center
Does your Harman Kardon product need service? You can locate the nearest authorized service center here. If you purchased a product directly from us please visit the
Harman Audio Store.
|
|
|
|
Returns
Your model might be eligible for direct factory exchange under our warranty program.
PLEASE DO NOT BRING YOUR UNIT TO A SERVICE CENTER.
If you purchased your product online or from a local retailer, you may use this form to request an exchange.
IMPORTANT: Physical damage is not covered by the manufacturer’s warranty. This includes but is not limited to the following: cracked or broken feet/doors/display windows/enclosures; damage caused by water, other liquids, fire, drops, other types of mishandling or abuse. All units with physical damage that is not covered under the warranty will be refused and returned to the original sender. Small scratches, scuffs and minor dents are generally considered acceptable. If you need assistance with repair of physical or cosmetic damages, or if you are not certain if your problem is covered by the manufacturer's warranty, please call our support center at 1.800.422.8027.
|
|
|
Warranty Exchange Request
|
|
|
|
|
|
|
| |
|
|
|
|