5.1-channel home theatre speaker system

$799.95799.95 per system
Product Actions
Add to cart options

In stock and ready to ship

Order within 05 hrs 55 mins and receive by Fri, Jun 02
Your zip code 80111 edit | Want it faster?
Fully integrated, 120W, 5.1-channel home theater speaker system with 200W subwoofer.

Engineered to serve as the complete home theater loudspeaker package, the HKTS 30BQ integrates high-performance 5.1-channel speakers – four front and rear satellites, plus a center loudspeaker – with a subwoofer in a single sophisticated offering. The combination of a dual-driver, center-channel speaker for replaying distinct movie dialogue, powerful dual-driver satellites that envelop you in all the high-energy action and a powered sub for low-frequency thrills makes this speaker system more than equal to handing the sonic excitement of Hollywood blockbusters and your favorite musical offerings. Constant-directivity waveguides fitted to the satellite speakers’ soft-dome tweeters decrease their directivity at high frequencies to produce a wide stereo image across a large listening area. Bass-boost and phase controls on the subwoofer allow you to adjust low-frequency sounds. And if that’s not enough, you can add more: You can put the speakers at ear height with the aid of the optional (and very attractive) HTFS 3/E floor stands and add two speakers to expand your home theater to a 7.1-channel system. The six-piece HKTS 30BQ provides a best-in-class cinema experience while elevating your home theater from the ordinary to the truly extraordinary.

Item# HKTS 30BQ

General Specifications

System frequency response 45Hz – 20kHz;

Audio Specifications

Satellite Nominal Impedance 8 ohms nominal
Frequency Response 45Hz – 20kHz (-6dB)
Satellite Sensitivity 86dB @ 2.83V/1 meter
Speaker Sensitivity 86dB @ 2.83V/1 meter
Speaker Maximum Recommended Amplifier Power 10 ~ 120 watts
Subwoofer Maximum Recommended Amplifier Power 200 watts RMS
Speaker Nominal Impedance 8 ohms nominal

System Specifications

Satellite Maximum Recommended Amplifier Power 10 ~ 120 watts

Subwoofer Specifications

Subwoofer External Trigger Input Voltage 3 ~ 30 volts AC/DC
Subwoofer Input Rating AC 100–120V, 50/60 Hz, 200W or AC 220–240V, 50/60 Hz, 200W

Speaker Specifications

Speaker Midrange Transducer Dual 3" (75mm) drivers, video-shielded
Speaker Tweeter One 3/4" (19mm) dome, video-shielded


Satellite Width (mm) 110
Satellite Height (mm) 299
Speaker Width (in) 10-11/32
Subwoofer Weight (lb) 19.8
Satellite Weight (lb) 3.3
Subwoofer Depth (in) 10-1/2
Subwoofer Weight (kg) 9
Satellite Depth (in) 3-15/32
Subwoofer Height (mm) 353
Subwoofer Height (in) 13-29/32
Speaker Height (in) 4-11/32
Speaker Weight (kg) 1.45
Speaker Weight (lb) 3.2
Speaker Height (mm) 110
Subwoofer Depth (mm) 267
Speaker Depth (mm) 88
Speaker Width (mm) 272
Satellite Weight (kg) 1.5
Satellite Width (in) 4-11/32
Satelitte Depth (mm) 88
Speaker Depth (in) 3-15/32
Subwoofer Width (mm) 267
Satellite Height (in) 11-25/32
Subwoofer Width (in) 10-1/2

Satellite Speaker Specifications

Satellite Midrange Transducer Dual 3" (75mm) drivers, video-shielded
Click here for a complete list of all specs for this product

Spec Sheet (EN)

English 1012 KB
  • 4 SAT-TS30 satellite speakers for front left/right and surround left/right channels
  • 1 CEN-TS20/30 center-channel speaker
  • 1 HKTS200SUB powered subwoofer
  • 4 wall-mount brackets for satellite speakers
  • 1 wall-mount bracket for center speaker
  • 4 metal stop plates and screws for satellite-speaker wall-mount brackets
  • 1 20' (6m) combination LFE and trigger cable for connection to subwoofer
  • 1 13.1' (4m) color-coded cable for center speaker
  • 2 16.4' (5m) color-coded cables for front satellites
  • 2 32.8' (10m) color-coded cables for rear satellites
  • Owner’s manual

1 Year Electronic & 5 Years Loudspeaker

Products purchased online or from an authorized local retailer and under warranty may qualify for an exchange with a valid receipt.

Purchases made from an unauthorized dealer will not be eligible for exchange.


  • Sales and pre-sale assistance
  • Technical help
  • Parts and accessories
HKTS 30 is rated 4.6 out of 5 by 11.
Rated 5 out of 5 by from Excellent sound This are the best sound that I found, so buy they, and they have a very good looking
Date published: 2017-05-01
Rated 5 out of 5 by from great features Very satisfied with the sound quality. it's fantastic.
Date published: 2017-04-29
Rated 5 out of 5 by from Great System This speaker set is amazing!!!!! The quality and rich sound it produces blew my mind made me feel like I'm in the action. I would definitely recommend this system.
Date published: 2017-04-23
Rated 5 out of 5 by from very very good easy install...bought a month agos.work great..............
Date published: 2017-03-31
Rated 5 out of 5 by from Good Design and sound I bought this a couple of weeks ago and was very please how easy it was to connect the speaker wire that push style is an excellent design
Date published: 2017-03-24
  • y_2017, m_5, d_25, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_hkts30, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmankardon

Is Yamaha RX-V377 receiver a good fit for HKTS 30?

Asked by: Gaurav
HKTS30 is rated 8 ohm impedance and required amp power of 10 - 120 Watts. According to the data checked for your Yamaha RX-V377, it is rated at 8 ohms and output power of 85 Watts per channel (US, Canada Models), you will not have any issues using the speakers to this receiver.
Answered by: Joe G at Customer Service
Date published: 2017-05-23

Will the wall mounts work for mounting the rear channel speakers from the ceiling? If not, can you recommend a method to do that or stands for the speakers?

Asked by: TVCG
Unfortunately speakers were design to have just wall mounts, we do have an available stand for the satellites for your HKTS 30. Product name is HTFS 3 and here is the link for this unit ( http://www.harmanaudio.com/harman-kardon/HTFS+3.html ) hope the information helps.
Answered by: Mel at Customer Service
Date published: 2017-04-20

After spending 5 hours on learning about specs of Speakers and Receivers, I ended up buying Denon AVR-S920W 7.2-Ch. Specs: 90W x 7 @ 8 ohms, 20Hz - 20kHz, 0.08% HD. Will speaker system work fine if I use it for longer hours or crank it up?

Asked by: Jadira
Yes, it will work fine because HKTS 30 is driving up to 120 watts (RMS) at 8 ohmchannel. So even if you play it for long period of time or crank it up, it’s not going to damage the speaker.
Answered by: Drin at Customer Service
Date published: 2017-04-17

How would these speakers work with Denon - 1155W 7.2-Ch Model - AVR-S720W, [165W x 7 @ 6 ohms, 1kHz, 1-channel driven; 110W x 7 @ 6 ohms, 1kHz, 0.7% THD; 75W x 7 @ 8 ohms, 20Hz - 20kHz, 0.08% THD]. Would there be any short term/long term issues?

Asked by: Manpreet
It would work fine and there will be no issues since HKTS 30 can drive up to 120 watts (RMS) at 8 ohms per channel, and being that the final rating of 75W is the real rating, these speakers are a great match.
Answered by: Drin at Customer Service
Date published: 2017-04-17

Can this system handle action movies and video games well?

Asked by: dan2286
Yes, this system can perfectly handle action movies and video games, as well as long as it is connected to a receiver that has an impedance of 8 ohms and a power output of 120 watts per channel or less.
Answered by: Ron at Customer Service
Date published: 2017-04-14

Ok, I bought this speaker because of a good deal. I received speakers today but not able to find any amplifier with 120w 8ohm specs. Is there any good AV Receiver out there for these speakers? I am planning to return in other case. Thank you!

Asked by: Manpreet
Any of our Harman Kardon Audio Video Receivers will work perfectly fine with your HKTS 30. If you are considering adding more speakers in the future, we recommend the AVR 1710S
Answered by: Erik at Customer Service
Date published: 2017-04-13

Hello All, Is Yamaha 700W 5.1-Ch 4K Ultra HD and 3D Pass-Through A/V Home Theater Receiver with 140W x 5 @ 6 ohms, 1 kHz compatible with HKTS 30? Please advise. Thanks, Rameshkumar

Asked by: Ramesh
Yes, the Yamaha 700W receiver is compatible with our HKTS 30. The Yamaha puts out 140W x 5 @ 6 ohms while the HKTS 30 can handle up to 120W @ 8 ohms. The difference of 20W would not be enough to cause harm to the HKTS 30’s satellites as long as you do not push the receiver too much. Regarding the impedance difference, receivers try to match its impedance rating with that of the speakers, so in this case the Yamaha will try to move up from 6 to 8 ohms. Doing so, the power rating usually drops. That being said, when you connect the HKTS 30 to the Yamaha, the receiver's impedance will become 8 ohms and watts will be less than 120 watts which will work fine.
Answered by: Joe G at Customer Service
Date published: 2017-04-13

Can we use this speaker with Sony BluRay player which is compatible with 5.1 speaker system. I'm looking to replace the Sony speakers with HKTS. Will this work or Should I have to buy separate Amplifier ?

Asked by: RSSatish
The HKTS30 are 8 ohms speakers that can handle up to 120W (RMS) of power. As long as the SONY BLURAY player is rated at 8 ohms and driving 120W or below per channel, it would work fine.
Answered by: Joe G at Customer Service
Date published: 2017-04-13
  • y_2017, m_5, d_24, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_hkts30, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmankardon

Harman Kardon
In Stock

Find a Store Near You

The Store Locator is designed to help you find the closest store near you.

Click a store in the list or on the map to view details.